Microbial communities are an important cornerstone of all ecosystems. By studying their interactions and the way they respond to environmental changes we can better understand which factors contribute to the ability of the community to function. Previous experiments were conducted to gather data on how microbial community composition changes over time of a nutrient perturbation. After collecting this data, the microbial community composition was determined by sequencing of the 16SsrDNA gene. Being able to analyze these datasets of community composition, is where we are able to gain the most understanding of the significance of the community. There are main ways to look at these communities but the main three are the statistical approach, network analysis, and linear systems modeling. Each of these provides a different lens to look at datasets which can be used to give context to the various trends in the data. Being able to understand how to use each of these methods and determine which is the most useful for any given dataset is an important part of this research.

Article 22 of the International Telecommunications Union (ITU)'s Radio Regulations, Equivalent Power Flux Density (EPFD) is defined to ensure protection from harmful interference from non-geostationary (NGSO) systems into geostationary (GSO) satellites or earth stations. EPFD depends on the power flux density amplified or attenuated by the antenna gains of the NGSO and victim GSO systems. This occurs when an NGSO satellite transmits towards their system's ES, and some of the NGSO's transmitted power and causes interference to the GSO ES. EPFD calculations are performed in three directions: down, up, and intersatellite. The paper focuses on the EPFDdown algorithm and its applications in interference regulations and radio astronomy services (RAS), which tend to be more susceptible to unwanted emissions from other systems. In order to protect RAS, a new set of EPFD limits was established. To ensure that RAS is protected, the ITU Radiocommunication Sector restricts harmful interference. EPFDdown is defined as the EPFD from the NGSO satellite into the victim GSO earth station (ES), and accounts for the gain pattern of both NGSO satellite and the GSO victim ES in a particular orbital geometry and frequency band. In terms of RAS, RAS telescope sites on Earth are victim ES. To help prevent Article 22 limit exceedances, the ITU's Radiocommunication Sector (ITU-R) defined Recommendation S.1503 to provide guidance for satellite operators developing software to evaluate EPFD limits. This study focuses on implementing the EPFD-down algorithm in ITU-R S.1503 to analyze EPFDdown. With the EPFD validation process, NGSO systems can ensure that incumbent and planned GSO networks can operate without harmful interference, reducing data loss caused by interference from NGSO satellites. By going through each step of the EPFD validation process to validate Mangata's EPFDdown showing, this paper aims to make the complex EPFDdown algorithm more accessible to companies who are operating satellite systems.

Clew Maps is an update to a preexisting iOS App for indoor navigation called Clew. Presently, blind and visually impaired (BVI) individuals struggle to navigate unfamiliar spaces, and often have to rely on navigation instructions from a sighted guide. Clew Maps introduces a cloud database that can store pre-recorded routes that users can navigate along in an App Clip experience. This means that even non-Clew users can utilize the navigation tool without downloading the app, and that routes can be navigated by an individual without them having to walk along the route to record it ahead of time. Clew Maps robustly anchors the device utilizing ARKit’s ARImageAnchors; however, more work is required to better understand the potential use cases and address potential pain points for BVI individuals, such as route discovery and aligning to image anchors.

Research was done on actuators for a soft robotic glove that could assist children with cerebral palsy with at-home hand physical therapy. Materials in the construction of fabric-based soft pneumatic actuators were evaluated for this purpose. Three different bladder types (TPE impulse sealed bladders, condoms, and modeling balloons) were tested. The straightening and bending force each actuator could produce as well as the shape the actuator formed when unrestrained were analyzed. The results indicated that condoms and modeling balloons are superior to TPE bladders for the use as bending bladders. All bladder types performed well as straightening bladders so any could be chosen depending on the desired quantitative values such as the straightening force and force-to-pressure relationship. Further research is needed into the durability of each bladder type and into attachment methods of each bladder to prevent air leaking.

Clew Maps reimagines Clew as an app that crowdsources routes for indoor navigation and repurposes the existing backend code base to better serve this purpose by alleviating the pain points inherent to the current route-sharing mode of use. By implementing image anchoring to improve the robustness of the anchoring and alignment process, and by using a cloud database for route storage along with a new user interface (UI) to address the limitations of sharing routes in Clew, Clew Maps makes independent travel in unfamiliar public spaces more accessible for people with blindness and visual impairments (B/VI).

The RoboTuna is a robotic fish that will be able to collect samples from marine wildlife and allow us to better understand the oceanic ecosystem and the behavior of underwater creatures. This biomimetic robot will be able to get closer to fish and other creatures in their natural habitat than a person ordinarily could, and therefore will give new insights into how the underwater world is changing. Many of the RoboTuna’s pieces need to be flexible and waterproof, so casting and molding will be necessary to create them. The focus of this research was on fabricating a fin and air bladders for the RoboTuna, which included experimenting with different kinds of silicone rubber and urethane plastic. Existing soft robotic actuators have been extremely helpful to gain insight on how to move these parts without mechanical mechanisms. Shape memory alloys allow for simpler fin movement actuation instead of having to rely on a bulky motor. The same goes for moving the tail via air bladders, a kind of fluidic elastomer actuator. The differences between different kinds of silicones and how each material and molding method affected the fabricated parts are shown through flexibility and strength data. The information here can help future researchers determine what materials would be best for various parts of the RoboTuna and understand their options for soft robotic actuators.

There are long-standing examples of how engineers’ education in probability and statistics has not been sufficient. This work presents a novel theoretical framework to help teach and study statistical variability. Using this framework, we developed an interview guide and deductive coding scheme to use in interviews with engineering students. Early results from these interviews support our initial hypothesis of a slight induced variability bias.

Electromyography can be used as a human machine interface in which a person could control a computer or device with the electrical signals that cause muscle movement. This research used EMG data from the SEEDS data base to explore what features should be used by machine learning algorithms to accurately classify EMG data into which motion a subject is preforming. We extracted features from the EMG data and then ran three different feature selection algorithms to find which features were the most useful in classification. In the end, we found eight features that our various selection algorithms selected the most and concluded that those features would be good starting place when trying to classify EMG data.

The discussion of inclusivity and accessibility is often something that happens in a closed system, where able bodied people discuss how to make things easier for people who have a disability. When written out on paper, it seems silly, like not inviting someone to their own party, but in reality it happens constantly. In order to most effectively meet the needs of people with all abilities it is necessary to include them at the discussion and to recognize their ideas and solutions as more valid than those created by people who do not actively live with the disability they may be designing for. When teams, companies and projects fail to include people with disabilities in the create of solutions that will supposedly make their lives easier, not only does society lose the possible contributions of an entire community of people, but the solutions that are created are often not the most direct way to solve the problem. Inclusivity means not just including the ideas and words of people with disabilities but also recognizing the contributions of disabled designers and engineers themselves. During the summer of 2015, I worked on a research team led by Sara Hendren, with two other students from Olin College, Toni Saylor and William Lu. The research team worked on multiple projects in the accessibility and inclusivity design space, including conducting background research for a book proposal that Professor Hendren was starting and working to document and share the work done by a woman named Cindy, who had created a variety of innovative solutions to modify her environment to suit her needs as a person with multiple disabilities.

Prior research has shown piezoelectric vibration sensors can detect sail luffing, the acceleration of a flexible sail out of its normal wing state caused by a momentary reversal of the air pressure gradient over the sail. Luffing decreases boat performance by reducing the lift generated by the sail. Yet detecting sail luffing in flexible sails for robotic sailboats is still challenging. This paper presents three methods of sensing characteristics of a luff – air pressure differential which causes the luff, the acceleration of the sail as the luff occurs, and the influence of motion and acceleration of a luffing sail on members placed on the sail. We assess three different sensor types based on cost, ease of use, complexity of electrical interface, power consumption, accuracy of the sensor and amount of noise in sensor readings. To classify the most effective sensor for a given set of constraints, a multifaceted analysis has been performed with a piezoelectric vibration sensor, an acceleration sensor, and a gas pressure sensor. The accuracy and precision of each sensor at sensing sail luffing is evaluated by comparing the sensor output with a plot of the position of a single point on the sail through time generated with computer vision.

In late 2018, the City of Providence began allowing scooter share companies to operate within their city and to provide alternative forms of transportation to their population. These scooter share companies are required to uphold certain distribution requirements within the five geographical regions of the city: downtown, east side, south side, north west, and west. The system has definitely changed over time. From August 2018 to October 2019, Bird and Lime were the primary scooter providers to the city. They were later replaced by Spin and Veoride. In general, all providers increased their scooter deployments over time and saw an increase ridership as a result. It is clear, however, that each provider expanded their services to meet the needs of each region quite differently. This is evident in how fleet size differs across each region over time. In this paper, we discuss our study of the equity of access to scooter share services in Providence. We work with the City to investigate how ridership, coverage, and service vary across the region to identify underserved communities. Further, we analyze sociodemographic factors from 2018 census data to put these patterns into context.

Aquaculture has the potential to become the world's most important and sustainable option for protein production, but many of those involved in the industry currently lack the tools, resources, and education to make that happen. The purpose of this paper is to explore the feasibility of creating a robust but low-cost fluorometer that can detect chlorophyll levels and provide offshore aquaculture operations with immediate feedback on how their day-to-day operations impact the nutrient levels in the surrounding waters. The experimental setup involves an LED that emits light at 430 nm, focusing optics, and a photodiode placed perpendicular to the LED that is capable of detecting any light emitted from an algae sample. Preliminary results are promising as they demonstrate that such a setup is sensitive enough to detect the difference between samples containing different concentrations of chlorophyll. Further testing is required to optimize the fluorometer, and more research needs to be done into how to package the sensor and make it suitable for in situ trials.

Cerebral palsy patients currently face a significant treatment gap, which in part has to do with the high cost of traditional treatment methods. Research has shown that cerebral palsy affects 1 in 323 children in the United States (CDC, 2018), 42% of which aren’t receiving the care that they need. The medical expenses needed for children with cerebral palsy are 16 times higher than other children, which could account for this high percentage. The summer research team aims to look into and develop low-cost technology alternatives that could supplement these children’s physical therapy from home. Building upon existing work on controllable gloves with fabric actuators, my peer researchers and I looked into efficient design changes that accomplish our goal (Polygerinos, 2013).

Based on a review of research papers, existing strategies for glove position control (Yap, Kamaldin, Kim, Nasrallah, Goh, Yeow, 2015), were paired with sensors that could be integrated into a low-cost version. Two different sensor types were chosen to be evaluated for their feasibility for our project: a commercially available glove controller based on a conductive-ink bend sensor, and a novel conductive textile. Analysis of the data demonstrated that the glove controller sensors worked well, better than the conductive textiles, as expected. The results indicate that the glove sensors worked best when bending them along a radius rather than at a joint since the signal is strongest when the sensors are bent consistently along the length rather than at a single point. Further research is needed to characterize the accuracy of the sensors, but they are ready to be integrated and tested with the other control aspects.

With augmented reality technology that can accurately track a smartphone’s motion through 3D space becoming more prevalent, assistive technology researchers saw the opportunity to utilize it for navigation purposes. For the past few years, Paul Ruvolo and his team have been developing Clew, a free iPhone app that helps blind and visually impaired individuals navigate recorded routes indoors. This summer, my work has centered around the addition of rerouting and pausing capabilities for the Clew app. This report will conclude with the discussion of future opportunities and limitations of the app.

Given the detrimental environmental impacts from the fast fashion clothing industry, this research project delves into the recycling of textiles for thermal insulation and energy conservation. The present work includes analyzing recycled fabric samples with varying methods of construction in order to maximize the volume of air—since air resists heat conduction—while keeping the air pockets small enough to minimize thermal radiation and convection. Thermal modeling using resistance networks was done to validate the measurement method and increase the accuracy and replicability of thermal conductivity measurements. Multiple quilt samples were sewn and measured with a thermal conductivity apparatus, with the goal to reduce thermal conductivity as much as possible. Quilt samples varied by the density of top-stitching, where indentations caused by stitching could create air pockets. Preliminary findings show that quilt samples with higher stitch density have a lower thermal conductivity than samples with a lower stitch density.

During a research period of June-August 2020, a team of students from the Laboratory for Adaptation, Inclusion, and Robotics developed fabric-based pneumatic actuators for use in at-home physical therapy for children with spastic cerebral palsy. This paper focuses on the mechanical components of the device–specifically, what materials and productions methods are most effective in creating a useful, affordable actuator. It details the development of several working prototypes and what methods were used to test them, as well as what research remains to be done on this subject in the future.

The Link is Olin's campus-wide e-bulletin. In this issue: Olin Emergency Alert System I2E2 Prepares for a Busy Visitation Season Diana Dabby Launches CantoVario Gui Cavalcanti '07 and Mark Chang Included in List of 25 Innovators! Allen Downey Publishes New Book

The Link is Olin's campus-wide e-bulletin. In this issue: Olin Alum Tom Cecil Appointed to Board of Trustees Olin Hosts SailBot Regatta in June 2013 Olin's Academic Program Goals have been Revised Commencement Greeters, Marshals and Announcer Selected IEEE Consultant Panel Discussion

The Link is Olin's campus-wide e-bulletin. In this issue: Olin Sailbot Team Seeks Sponsorship LivingHealthy Newsletter Phonathon Ahead - "Save a Call" You Asked, We Can Make It Happen: Giving through Online Banking and Multiple Gift Options to Fulfill Pledge

The Link is Olin's campus-wide e-bulletin. In this issue: Call for Suggestions - Main Speaker at Commencement '13 and Beyond Winter Town Meeting Now Available on YouTube Recyclemania 2012 President Miller Elected to National Academy of Engineering Margret Ann Seger '13 Named to KPCB Engineering Fellows Program The Princeton Review Names Olin 'Best Value College' for 2012

The Link is Olin's campus-wide e-bulletin. In this issue: Argosy Collaborative Faculty Exchange: Applications Sought! First PowerChords Studio Album Available October 26 New and Improved Online Giving Page Upcoming I2E2 Latin America Visitors MySafeCampus Incident Reporting System

The Link is Olin's campus-wide e-bulletin. In this issue: Build Day 2013 Something New in Milas Hall Olin EXPO and SCOPE EXPO Commencement 2013 Seniors Announce Class Gift Scientific American Quotes Professor Jon Adler & References his Study Project BlueGene by Avery Louie is Featured on AwesomeFoundation.com

The Link is Olin's campus-wide e-bulletin. In this issue: Tuition-Assistance Benefit President Miller Interviewed on WBUR's Radio Boston Ali Badala Weds Olin Alumni at Stanford Commencement! Luis '10 and Tiana '08 Complete 108-mile Trek

The Link is Olin's campus-wide e-bulletin. In this issue: Olin is Co-hosting Sailbot 2013 Film Crews Document Olin's Innovative Approach Michael E. Moody Faculty Chair Named Wellness Program at Babson: Learn to Meditate Olin College is Founding Member of First-of-its-Kind $15M USAID Grant SERVice Success!

The Link is Olin's campus-wide e-bulletin. In this issue: Help Olin Raise Money for the American Cancer Society Entrepreneurship Speaker Series #9: Karen Warner Babson vs. Olin Battle of the Chefs Allen Downey Receives UCES Award for Innovative Work Olin Spelling Bee Team Makes it to the Finals